Often asked: How To Remove Paint From Rc Body?

How do you remove paint from polycarbonate RC body?

RE: removing paint from polycarbonate / lexan bodies depending on the paint used I use plain ole rubbing alcohol to get off parma paints, pour it on a paper towel put the towel on the paint, and wait a min good chunk will wipe off easily.

How do you remove paint from Lexan RC body?

first liberally soak a rag, cloth, or shop towel with the nitro, then press onto area for bout 2 second and wipe in one motion to remove the paint. DO NOT SCRUB! repeat around the body, taking a dry rag and dabbing off the remaining liquid. repeat this as nessesary and let the fuel do the work.

Can you repaint an RC car body?

All you ‘ll need to get stunning results are a few cans of spray paint and masking tape. Position the body over the chassis, line up the wheels with the wheel wells, and mark the spots where the body posts contact the shell.

Can you use paint thinner on Lexan?

You can use acetone or paint thinner. Absolutely NOT! Both of these will damage a lexan body.

Can you use regular spray paint on RC car bodies?

Most RC bodies are made out of clear polycarbonate (also known as “Lexan,” which is actually a brand of polycarbonate plastic). “ Regular ” spray paints don’t adhere well to polycarbonate, especially when subjected to the flexing and impact of RC use. For ABS and styrene (“hard”) bodies, use the spray enamel paints.

You might be interested:  How To Remove Paint From Models?

How do you paint RC body flames?

  1. PREP THE BODY. Scuff the inside of the body to roughen the surface and give the paint something to hold on to.
  2. DETAIL THE GRILLE AND WINDOW TRIM.
  3. APPLY THE WINDOW AND HEADLIGHT MASKS.
  4. APPLY THE WINDOW AND HEADLIGHT MASKS.
  5. MASK THE GRILLE AND TAILLIGHTS.
  6. APPLY THE FLAME MASKS.
  7. CONNECT THE FLAMES.
  8. SPRAY THE MAIN COLOR.

How do you remove Tamiya polycarbonate paint?

Nitro fuel or methylated spirits/white spirits seem to be the only way to go. Acetone and caustic soda will damage the lexan. But it will take a bit of time and elbow grease, and if the paint is Tamiya PS paint, it may not shift at all.

Does acetone hurt Lexan?

Never use aromatic or halogenated solvents like toluene, benzene, gasoline, acetone or carbon tetrachloride on Lexan polycarbonate materials. Use of incompatible cleaning materials with Lexan sheet can cause structural and/or surface damage.

Related posts

Leave a Comment